back to the Dollhouse Workshop
  • Test the joint before using glue
    950_housebod...
  • Glue: My favorite is Aleene's Tacky Glue... it is thick so it doesn't soak away in the joint or drip all over the place.  It dries clear so the tiny squeezings aren't so visible
    950_housebod...
  • Tape it tight... line up the front and back surfaces carefully
    950_housebod...
  • Both upper floors
    950_housebod...

  • 950_housebod...
  • Glue in the grooves of the second Side - tip it into position
    950_housebod...
  • and tape it tight too
    950_housebod...
  • Squeeze tightly when moving and hold it square
    950_housebod...
  • tape a Divider between the floors and to the Side so the parts will stay square
    950_housebod...
  • Tidy up the edges of the Groove Fill
    950_housebod...
  • There's already glue in the groove
    950_housebod...
  • Press or tap it to make the wall smooth
    950_housebod...