back to the Dollhouse Workshop
  • Glue the Eaves to the Roof ( the Front Roof/Front Eaves or the Rear Roof/Rear Eaves)
    950_roof_01....
  • Lined up on the edge
    950_roof_02....
  • Taped tightly inside and outside
    950_roof_03....
  • and re-adjusted to be perfect on the edge
    950_roof_04....
  • The Rear Roof set (above) and the Front Roof set (below)
    950_roof_05....
  • Shingle Lines start with one-shingle-length on the lower edge. This is the Front Roof set...
    950_roof_06....
  • ...and this is the Rear Roof set
    950_roof_07....
  • The rest of the lines are 1" apart
    950_roof_08....
  • The Front Roof set is spaced evenly side-to-side and lined up at the top. I am marking the Sidewalls so I can paint the overhang without painting the glue joint
    950_roof_09....
  • The Rear Roof set, centered and marked for painting
    950_roof_10....
  • Masking tape just inside of the line so the paint will go past the edge, but not so far that the glue won't have clean wood to grab
    950_roof_11....
  • The Front Roof is painted and I am gluing it to the house
    950_roof_12....