back to the Dollhouse Workshop
  • Lilliput Window parts (except Apple Blossom), Front opening models or kits with applied clapboard will have heavier spacers and more liners
    lilliput_win...
  • Paint the parts - Shutters
    lilliput_win...
  • Paint the parts - Lintel/Sill
    lilliput_win...
  • Where I am gluing, I have sanded the paint to remove the surface shine
    lilliput_win...
  • Glue the Shutter Spacer to the back of the Shutter
    lilliput_win...
  • Shutter with Spacers, and Lintels
    lilliput_win...
  • Glue the Shutter to the House Front - The Spacer is in the window opening, The Shutters are centered up-and-down
    lilliput_win...
  • Glue the Lintels to the Front, centered on the window side-to-side
    lilliput_win...
  • The window set is square with the Front
    lilliput_win...
  • This is how the outside window parts look from inside the house.
    lilliput_win...
  • When the inside is complete (paint, wallpaper, etc) , set the pane into the opening...
    lilliput_win...
  • ...and hold it there with the inside window trim. Front Opening houses have an extra layer of liners in the opening before the trim is attached.
    lilliput_win...