back to the Dollhouse Workshop
  • Pre-assembly of Porch Floor and Porch Beam Set (the Divider is not glued - it squares the Porch Beam Set)
    pict0002.JPG
  • The underside of the Base Floor and the Tower Base Floor with the Underframes attached
    pict0003.JPG
  • The underside of the Porch Floor set with the Underframes attached
    pict0004.JPG
  • These Upper Floors are taped together temporarily for a "stand" to help hold the Base Floor/Side for assembly
    pict0005.JPG
  • The Side is attached to the Base, lined up carefully on the bottom... the "Stand" supports the Side so you're not struggling with it while getting the parts lined up.
    pict0006.JPG
  • Tape the Dividers to the Side as a spacer to locate the Middle Floor
    pict0007.JPG
  • Cut the corners to make them square
    pict0008.JPG
  • Attach the Middle Floor, tape on another Divider, then attach the Top Floor. This photo is taken from what will be the front... the stair holes are closer to the front-right
    pict0009.JPG
  • move the dividers to the other end
    pict0010.JPG
  • Attach the other Side
    pict0011.JPG
  • Lining up the Left Front with the rest of the house parts is what makes the house straight. line up and attach across the Base, then up the Side making the 'line-up' perfect as you go.
    pict0012.JPG
  • Nail into the upper floors with the Dividers in the middle
    pict0013.JPG