JM401 customization
Double Window
Floor Finish
JM33 
JM44SE (you are here)
JM66
E1600
E1640
DH37K
Fit? What to check:
Foundation height:
Base Floor Thickness
Floor-to-Ceiling height:
Overall Wall width and height
Wall overhangs Foundation
Construction style
FLAT! slideshow
Assembly Original
Wall Cutout Wall Liner
Oscillating Saw
Jig Saw
Utility knife
Check the Stairs slideshow
Move the stairhole
DHTMLGoodies.com
07. The printed floors must be protected from damage due to tape, wear-and-tear, glue, paint.
See "Floor Finish" in the links at left 07D.png
07. The printed floors must be protected from damage due to tape, wear-and-tear, glue, paint. See "Floor Finish" in the links at left 07D.png
DHTMLGoodies.com
07B. Paint (first coat) and sand down to the wood
See the "PaintingP button at left 07BD.png
07B. Paint (first coat) and sand down to the woodSee the "PaintingP button at left 07BD.png
DHTMLGoodies.com
12. This is where I cut a doorway into the Liner, and use that to trace a door onto the Sidewall
see "Wall Cutout" at left 12D.png
12. This is where I cut a doorway into the Liner, and use that to trace a door onto the Sidewallsee "Wall Cutout" at left 12D.png
DHTMLGoodies.com
13. If there is a stairway in the way, either forgo the doorway or move the stairhole 3/4 - 1" toward the front
see "Move the Stairhole" at left 13D.png
13. If there is a stairway in the way, either forgo the doorway or move the stairhole 3/4 - 1" toward the frontsee "Move the Stairhole" at left 13D.png
DHTMLGoodies.com
19. There's room for a doorway in this Liner too, but it makes the part fragile
so handle with care 19D.png
19. There's room for a doorway in this Liner too, but it makes the part fragileso handle with care 19D.png
