JM4600 Front Set

DHTMLGoodies.com

00. Assemble the Front Set ../../../RGT_Website_assets/ajax-loader.gif

DHTMLGoodies.com

01. First we'll measure and identify the parts 01D.png

DHTMLGoodies.com

02. Clapboard profile in the upright orientation 02D.png

DHTMLGoodies.com

03. Front Set Walls 03D.png

DHTMLGoodies.com

04. 9¾ tall 04D.png

DHTMLGoodies.com

05. this is 9¾ 05D.png

DHTMLGoodies.com

06. The Front Wall is 11¼ wide 06D.png

DHTMLGoodies.com

07. this is 11¼ 07D.png

DHTMLGoodies.com

08. The Inset Wall is 3½ wide 08D.png

DHTMLGoodies.com

09. 3½ 09D.png

DHTMLGoodies.com

10. The Spacer is also 3½ wide, and is 10 17/32 long 10D.png

DHTMLGoodies.com

11. this is 10 17/32 (called ten and seventeen thirty seconds) 11D.png

DHTMLGoodies.com

12. Set up the Inset Walls and Porch Spacers 13D.png

DHTMLGoodies.com

13. Without glue - the Spacers fit in between the Walls 12D.png

DHTMLGoodies.com

14. Tape the corners 14D.png

DHTMLGoodies.com

15. A long strip of tape all the way around gets things tight 15D.png

DHTMLGoodies.com

16. The clapboard aims down on both sides 16D.png

DHTMLGoodies.com

16a. Glue on both Sides (Inset Walls), not on the Spacers 16aD.png

DHTMLGoodies.com

16b. Set the Front, clapboard facing inward and matching the Sides 16cD.png

DHTMLGoodies.com

17. Glue the Front to the Sides, NOT to the Spacers 17D.png

DHTMLGoodies.com

17a. Another build, same step 17aD.png

DHTMLGoodies.com

17b. Line up the corners 17bD.png

DHTMLGoodies.com

18. Or you can tape the corners like this 18D.png

DHTMLGoodies.com

19. Lined up all around 19D.png

DHTMLGoodies.com

20. Tape it tight 20D.png

DHTMLGoodies.com

21. Turn it over 21D.png

DHTMLGoodies.com

22. The clapboard profile is all in the same orientation 22D.png

DHTMLGoodies.com

23. When the glue has set, take off the Spacers, 23D.png

DHTMLGoodies.com

24. Ready! 24D.png

Front Set Details
First Floor Wall Assembly This detail of the FrontSet was photographed with un-painted parts... in your build you should paint the Walls before assembly Do not glue the Porch Spacers in... they will be removed later	DHTMLGoodies.com 00. Assemble the Front Set ../../../RGT_Website_assets/ajax-loader.gif DHTMLGoodies.com 01. First we'll measure and identify the parts 01D.png DHTMLGoodies.com 02. Clapboard profile in the upright orientation 02D.png DHTMLGoodies.com 03. Front Set Walls 03D.png DHTMLGoodies.com 04. 9¾ tall 04D.png DHTMLGoodies.com 05. this is 9¾ 05D.png DHTMLGoodies.com 06. The Front Wall is 11¼ wide 06D.png DHTMLGoodies.com 07. this is 11¼ 07D.png DHTMLGoodies.com 08. The Inset Wall is 3½ wide 08D.png DHTMLGoodies.com 09. 3½ 09D.png DHTMLGoodies.com 10. The Spacer is also 3½ wide, and is 10 17/32 long 10D.png DHTMLGoodies.com 11. this is 10 17/32 (called ten and seventeen thirty seconds) 11D.png DHTMLGoodies.com 12. Set up the Inset Walls and Porch Spacers 13D.png DHTMLGoodies.com 13. Without glue - the Spacers fit in between the Walls 12D.png DHTMLGoodies.com 14. Tape the corners 14D.png DHTMLGoodies.com 15. A long strip of tape all the way around gets things tight 15D.png DHTMLGoodies.com 16. The clapboard aims down on both sides 16D.png DHTMLGoodies.com 16a. Glue on both Sides (Inset Walls), not on the Spacers 16aD.png DHTMLGoodies.com 16b. Set the Front, clapboard facing inward and matching the Sides 16cD.png DHTMLGoodies.com 17. Glue the Front to the Sides, NOT to the Spacers 17D.png DHTMLGoodies.com 17a. Another build, same step 17aD.png DHTMLGoodies.com 17b. Line up the corners 17bD.png DHTMLGoodies.com 18. Or you can tape the corners like this 18D.png DHTMLGoodies.com 19. Lined up all around 19D.png DHTMLGoodies.com 20. Tape it tight 20D.png DHTMLGoodies.com 21. Turn it over 21D.png DHTMLGoodies.com 22. The clapboard profile is all in the same orientation 22D.png DHTMLGoodies.com 23. When the glue has set, take off the Spacers, 23D.png DHTMLGoodies.com 24. Ready! 24D.png
Slideshows support but do not replace the instructions