|
Other Great! Websites:
|
DHTMLGoodies.com
1. Lining up the flooring for marking
flooring/flooring25_lg.jpg
DHTMLGoodies.com
5. Sand a little clearance on the bottom
flooring/flooring29_lg.jpg
DHTMLGoodies.com
7. Be extra-gentle at the ends of the cut
flooring/flooring31_lg.jpg
DHTMLGoodies.com
9. Sand a clean edge and for clearance at the bottom
flooring/flooring33_lg.jpg
DHTMLGoodies.com
12. The fill-in piece will go in front.
flooring/flooring36_lg.jpg
DHTMLGoodies.com
13. Two sections... I will do tile in the third room
flooring/flooring37_lg.jpg
DHTMLGoodies.com
14. End-grain to end-grain doesn't look good
flooring/flooring38_lg.jpg
DHTMLGoodies.com
15... but a cross-grain looks great!
flooring/flooring39_lg.jpg
DHTMLGoodies.com
16. Back-sand clearance for a tight joint
flooring/flooring40_lg.jpg
DHTMLGoodies.com
21. Press down with a smooth cylinder
flooring/flooring45_lg.jpg
DHTMLGoodies.com
23. Squeeze until glue shows (dont smear it on the flooring)
flooring/flooring47_lg.jpg
DHTMLGoodies.com
24. Let the glue dry for 1/2 hour or so
flooring/flooring48_lg.jpg
DHTMLGoodies.com
26. Left-overs from 3 sheets could do a small room
flooring/flooring50_lg.jpg
DHTMLGoodies.com
... on to finishing, and then tile and carpet
../Buttons/Next.png
|
