Taking Acrylic Urethane finish off a wood print floor using alcohol (85%).
Use good ventilation and discard paper towels outside.
Floor Finish
Clear Finish
Surface Stain
Mod Podge
Repair
Remove Finish (here)
08. Scotch-Brite pad (non-woven abrasive - also called "synthetic steel wool")
08D.png
31. I took off more than just the 'shine' in the beginning and now it shows
31D.png
32. Here I tested strippers with an oil-based polyurethane finish
TheContendersD.jpg
33. I used denatured Alcohol again, as well as Lacquer Thinner and Acetone
TheProcessD.jpg
