This slideshow uses an your build, you should Paint, Finish the Floors, and do Wiring along the way.
Click on the picture for a printable copy
Housebody1 Housebody2 Housebody3 Painting (second-coat) Top Floor Start the Wiring Foundation Roof prep. Roof (here)Dormer Details Trim and Brackets
DHTMLGoodies.com
spread glue on the Front Roof bottom and left (straight) edges
Roof/Roof20L.png
DHTMLGoodies.com
Lined up on the inside with the back edge of the Tower Top Side
Roof/Roof24L.png
DHTMLGoodies.com
Are you wiring? There's an important step to do before gluing on the Right Side Roof
Roof/Roof27L.png
DHTMLGoodies.com
Spread glue on the bottom and front (angled) edge of the Right Side Roof
Roof/Roof26L.png
DHTMLGoodies.com
Lined up with the back edge of the Top Floor - tape tightly
Roof/Roof30L.png
DHTMLGoodies.com
Spread glue on the Bottom and square edge of the Left Front Roof
Roof/Roof31L.png
DHTMLGoodies.com
Glued to the milled face of the Tower Top Side
Roof/Roof32L.png
DHTMLGoodies.com
Glue the Left Side Roof - it goes behind the Left Front Roof
Roof/Roof35L.png
DHTMLGoodies.com
It lines up in back with the edge of the floor
Roof/Roof36L.png
DHTMLGoodies.com
Use a straight edge to line up the outside face and corner
Roof/Roof39L.png
Are you wiring? There's an important step to do before gluing on the Right Side Roof
Roof/Roof27L.png
Spread glue on the bottom and front (angled) edge of the Right Side Roof
Roof/Roof26L.png
