JM907 Roofs preparation

1. Top Tower Sides glued to the back of the Tower Front Roof/Roof01L.png

2. Lined up on top Roof/Roof02L.png

3. Both sides Roof/Roof03L.png

4. Hold the Side Roofs like this to determine the outside surface Roof/Roof04L.png

5. The outside will get shingle guidelines Roof/Roof05L.png

6. 1 1/4" for the first guideline Roof/Roof06L.png

7. Mark both ends of the roofs then connect the marks Roof/Roof07L.png

8. This is the outside of the Left Front Roof Roof/Roof08L.png

9. Extend the marks on a big roof Roof/Roof09L.png

10. The Front Roof Roof/Roof10L.png

11. The Tower Roofs Roof/Roof11L.png

12. Prepare a "Stand": tape a Blind Divider to the Attic Divider Roof/Roof12L.png

13. The Stand will help hold up the Front Roof while you work on it Roof/Roof13L.png

14. Inspect the area the Front Roof covers on the Top Floor Roof/Roof14L.png

15. Scrape an area smaller than what the Front Roof covers Roof/Roof15L.png

16. Glue doesn't stick well to the floor covering Roof/Roof16L.png

17. Take care to stay well within the hidden space Roof/Roof17L.png

Next: Assemble the Roofs ../Buttons/ClickHere.png