Supplies: see "Supplies" above
Paint or Primer
1" foam Brush
320 grit sandpaper
PreAssembly:
Parts ID
WallSet parts orientation
Paint & Sand (here)
Paint Techniques (video)
Sand Techniques (video)
Assembly:
WallSets
Windows
Installation
Wall Cutout
Oscillating Saw
Utility knife
Customization Q&A
More: (techniques that apply)
Installation (JM1065)
Window assembly (JM1065)
Bay Facia Trim
for a larger, printable image
DHTMLGoodies.com
00. Paint (first coat only) and sand the parts
../../../RGT_Website_assets/ajax-loader.gif
00. Paint (first coat only) and sand the parts
../../../RGT_Website_assets/ajax-loader.gif
DHTMLGoodies.com
01. -interior semi-gloss latex paint (also called acrylic)-
the "first coat" can be primer or whatever color paint is being used 01D.png
01. -interior semi-gloss latex paint (also called acrylic)-the "first coat" can be primer or whatever color paint is being used 01D.png
DHTMLGoodies.com
02. Trim: paint one face and the edges...
Only enough paint to fill the grain with very little left on the surface 02D.png
02. Trim: paint one face and the edges...Only enough paint to fill the grain with very little left on the surface 02D.png
DHTMLGoodies.com
08. Top: paint into every detail - leave the back (down in this photo) un-painted
08D.png
08. Top: paint into every detail - leave the back (down in this photo) un-painted
08D.png
DHTMLGoodies.com
12. If paint slops into the Pane's groove, mop it out with a scrap of paper
12D.png
12. If paint slops into the Pane's groove, mop it out with a scrap of paper
12D.png
DHTMLGoodies.com
14. Foundation: outside face only... this is Benjamin Moore #1550 'Cumulus Cloud'
14D.png
14. Foundation: outside face only... this is Benjamin Moore #1550 'Cumulus Cloud'
14D.png
DHTMLGoodies.com
18. Sand until the paint is 'satiny', transparent, and lots of wood is showing
18D.png
18. Sand until the paint is 'satiny', transparent, and lots of wood is showing
18D.png
DHTMLGoodies.com
19. I wiped off excess paint on the ends and corners
so there shouldn't be many dribbles 19D.png
19. I wiped off excess paint on the ends and cornersso there shouldn't be many dribbles 19D.png
DHTMLGoodies.com
40. Take extra care to not 'round' the ends
(don't do this step with sanding!!) 40D.png
40. Take extra care to not 'round' the ends(don't do this step with sanding!!) 40D.png
DHTMLGoodies.com
52. This edge will be right next to the window pane after assembly so we'll second-coat it now
52D.png
52. This edge will be right next to the window pane after assembly so we'll second-coat it now
52D.png
