J535 Housebody Assembly

00. use 'high tack' tape, not 'painter's tape' ../../RGT_Website_assets/ajax-loader.gif

01. Glue in both floor-grooves of each Sidewall 01D.png

02. The stair hole can go on either side but must be closer to the front (up) 02D.png

03. The Base Floor; both floors stick up in front (up) 03D.png

04. Tape 04D.png

05. My tape wasn't staying tight so I 'tabbed' it 05D.png

06. Glue in both floor-grooves of the Front 06D.png

07. Glue on the front edge (up) of the Sides 07D.png

08. lined up side-to-side at the base corners 08D.png

09. line up and tape both Base Corners 09D.png

10. Push the Side as necessary to make it line up with the Front at the top 10D.png

11. Tape in the doorway to pull the Base Floor to the top of the groove 11D.png

12. Lots of tape - straight and tight! 12D.png

13. Pull the Front tight at the top too. 13D.png

14. The back: tight and to the top of the groove 14D.png

15. Put the stairhole down so you can do the Groove-Fill now 15D.png

16. The Groove-Fill - see "Parts Identification: Packs" slide 06-6 16D.png

17. Press it flat to make a smooth inside surface 17D.png

00. Next slideshow (Logs): Click the "Click" button (above) ../../Buttons/ClickHere.png